PDA

View Full Version : F's: camlight systems cc400 discharger



frodus
11 December 2012, 1356
I've got a very good condition Camlight Systems CC400 discharger for sale. I've used it under 50 times, in a lab environment. I've been the only user and it's been taken care of.

According to Camlight, THESE ARE NO LONGER BEING MADE.

Specs:

400W maximum continuous discharge (at 86F. or 30C. ambient temperature, or lower).

Up to 500W allowed for the first 15 seconds of a discharge (at 86F. or 30C. ambient temperature, or lower).

Removing jumper allows continuous 500W discharges (at 86F. or 30C. ambient temperature, or lower).

0.5V to 60V battery voltage range.

Constant-Current Mode and Burst Mode: 1A-150A current (for 2V-60V cells/packs), selectable in 1A increments. Limited to 100A at 0.9V.

Throttle Mode: 200mA-150A discharge current (for 2V-60V cells/packs), determined by maximum current setting and throttle, in as small as 50mA steps. Limited to 100A at 0.9V.

In Throttle Mode, the CC-400 can be calibrated for different 0% - 100% throttle pulse width ranges.

Accuracy is +/-35mA from 1A-20A and +/-1% from 21A to 150A (typically better than +/-0.6%).

Uses two large terminal blocks so you can tailor your hookup to your needs, with up to 4AWG wire.

Manual:

http://www.camlight.com/techinfo/Camlight_CC-400_UserGuide.pdf

Includes:

CC400

Power supply

Original box

Servo driver for use without CBA discharger

I'm looking for $350 for everything, shipped USPS

frodus
26 December 2012, 1728
sold