Yes, but poor quality, cannot see information. Do you have it bigger size?Quote:
Originally Posted by biothundernxt
Printable View
Yes, but poor quality, cannot see information. Do you have it bigger size?Quote:
Originally Posted by biothundernxt
The file I attached was higher quality, but it made it small for some reason.Quote:
Originally Posted by dnsukraine
Here is a link to imgur:
https://imgur.com/gallery/gCvunW8
I got the battery hooked up to the charger today.
http://imgur.com/gallery/b0Z8Xz9
Pretty happy with the result.
It's running a balance routine now and I'm going to let it run overnight with a fan blowing on the bms.
This weekend I hope to have the 3d printed mock-up of the swingarm adapter so I can mount the wheel to it and hook the fully charged battery up to the controller and run another full speed test.
I think the 3d printed part should hold if I gradually ease on the throttle.
Also, my electric cable throttle adapter came in:
http://imgur.com/gallery/JIGNEqi
I'll be hooking that up pretty soon. I'll upload some pictures when I do.
How much does that motor weigh?
Sent from my SM-T380 using Tapatalk
I haven't weighed it yet, but I would guess around 75lbs. It's pretty heavy.Quote:
Originally Posted by Frank
A lot of unsprung weight, I know, but I don't plan on taking it to the track so I'm not particularly worried about it.
I test fitted the 3d printed swingarm adapter today.
Everything seems to fit pretty nicely!
QS Motor Fazer swingarm adapter 3d printed mock-up test fit https://imgur.com/gallery/1UNv7pS
Scratch that. I got the other half printed, and it does not fit.
Time to make V2!
I think I neglected to account for the thickness of the walls of the swingarm itself in my match and measurements.
https://imgur.com/gallery/xTC9wQY
It will fit fine if you can take the wheel off before install. It looks to me that the swing arm will clamp down on it.
You can add a shim if its too far out. Maybe the hub spacers have to be re-made a notch wider?
I re-did the 3d design already, it only took a few minutes.Quote:
Originally Posted by Stevo
That's why I made it out of plastic the first time; so that I could test fit before having it machined out of aluminum.
Now I just have to wait for it to print again. :)
Update time again!
I mounted everything up temporarily:
http://imgur.com/gallery/KNBrENV
I definitely need longer shocks, but I am really happy with how it is looking so far!
In other news, my brake rotor, caliper, and the holder bracket all arrived:
http://imgur.com/gallery/R7EHI4X
The axle does not fit, but I knew it would not fit when I ordered it. I need to have the axle hole bored out by another 5mm (out to 25mm)
Things are looking promising!
I have some work to do to get the swingarm mounted properly, but I have a plan.
I'll post more pictures when I get that done.