Power in Flux
Likes Likes:  1
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 40

Thread: Group Buy: Sevcon Gen4 Size 6, DeltaQ, contactors

              
   
   
  1. #1
    Empulse R #24 frodus's Avatar
    Join Date
    Aug 2010
    Location
    Portland, OR
    Posts
    2,416
    Post Thanks / Like

    My Social Networking

    Follow frodus On Twitter

    Group Buy: Sevcon Gen4 Size 6, DeltaQ, contactors

    I am organizing a Group Buy for components that are suplus stock from a company has chosen to go a different direction.

    I have the following including the pricing:
    - DeltaQ QuiQ 912-7254 72V charger - $200 ($50 programming fee for Lithium)
    - DeltaQ QuiQ 922-7254 72V charger with DC-DC converter - $250 ($50 programming fee for Lithium)
    - Sevcon Gen4 Size 6 model 634A85203, 72VDC nominal, 116VDC max, 39V min, boost current 660A, 2 minute current 550A, 220A continuous - $700 ($50 programming fee depending on motor)
    - Tyco LEV100A4ANG contactor, 12V coil (no economizer), 100A - $50
    - Tyco EV200AAACA contactor, 9-36V (with economizer) not compatible with Sevcon directly - $80
    - Tyco LEV200 contactor, 12V coil compatible with Sevcon - $80
    - Sevcon DC-DC converter 622-11086 72V/80V 300W 12V output - $100
    - Sevcon DC-DC converter 622-11213 50-120V 500W 12V output - $100
    - Orion 48-cell BMS with Current sensor - $500 (2 left at this price)
    - Wiring harness for the Sevcon Gen4 with a matching Motenergy encoder connector. Populated for contactor, encoder, KSI, FW/REV switch, thermistor, throttle and interlock - $100
    - IXXAT Cable and DVT software - $400

    I can now supply the following motors with this group buy.
    ME1507 - $1000
    ME1616 - $1100
    ME1302 - $800
    ME1304 - $800

    I don't have stock yet, because I have to purchase in Bulk, but let me know if you're interested and I can put you on the group buy and then order.

    Don't worry if you miss out on the buy. I may have extras, just ask.

    Regards,
    Travis
    www.emf-power.com
    Last edited by frodus; 6 Days Ago at 0903.

  2. Likes nedfunnell liked this post
  3. #2
    Senior Member
    Join Date
    Apr 2014
    Posts
    103
    Post Thanks / Like
    Do you know the max stator frequency as it relates to the max RPM for the number of poles in an induction motor for the Sevcon Gen 4 controller?

    I just found info that the max frequency is 500Hz. Is that correct?
    Last edited by Electro Flyers; 4 Weeks Ago at 0047.

  4. #3
    Empulse R #24 frodus's Avatar
    Join Date
    Aug 2010
    Location
    Portland, OR
    Posts
    2,416
    Post Thanks / Like

    My Social Networking

    Follow frodus On Twitter
    I'd have to defer to the Sevcon Manual for that.
    http://www.thunderstruck-ev.com/Manu...anual_V3.0.pdf

    It looks like section 5-9/5-10 discusses finding max motor RPM/Frequency.

  5. #4
    Member
    Join Date
    Oct 2016
    Location
    Salt Lake
    Posts
    30
    Post Thanks / Like
    I would be interested in the sevcon gen 4 to replace my kelly.
    The kelly speed throttle and lack of instant torque has been driving me nuts!

  6. #5
    Empulse R #24 frodus's Avatar
    Join Date
    Aug 2010
    Location
    Portland, OR
    Posts
    2,416
    Post Thanks / Like

    My Social Networking

    Follow frodus On Twitter
    Quote Originally Posted by cmcnall View Post
    I would be interested in the sevcon gen 4 to replace my kelly.
    The kelly speed throttle and lack of instant torque has been driving me nuts!
    What motor are you using with the Kelly?

  7. #6
    Senior Member Stevo's Avatar
    Join Date
    Nov 2014
    Location
    Behind the Redwood Curtain- REDWOOD ORIGINAL!!
    Posts
    349
    Post Thanks / Like
    Can you program one for a ME1304 or ME1616 and how much of a programming fee are you thinking? Can you provide all of the necessary connectors ?
    I'd also be interested in the sevcon 500w dc-dc
    Last edited by Stevo; 4 Weeks Ago at 1225.
    Original build: http://vorworxemc.wix.com/vorworx
    Current rides: '96 Honda Ohlins VFR, '03 Cannondale C440R, '03 Cannondale Cannibal, '06 Yamaha 450 Wolverine 4x4

  8. #7
    Empulse R #24 frodus's Avatar
    Join Date
    Aug 2010
    Location
    Portland, OR
    Posts
    2,416
    Post Thanks / Like

    My Social Networking

    Follow frodus On Twitter
    I can provide a base load for the following:
    1507/1616
    ME4201
    ME0913
    ME1117
    ME1302/1115/DLC28
    ME0907
    ME1114/1304/1012/DLC20

    I'm thinking the Programming fee is $50 per controller. Customization would be extra (like custom current limits, custom regen, custom maps, etc).

    I am working on sourcing some harnesses for these. I can currently only provide the 35pin ampseal connector, and pins. User would crimp their own wires.

  9. #8
    Junior Member
    Join Date
    Mar 2017
    Posts
    9
    Post Thanks / Like
    Hi Travis,
    I would be interested in one 500W Sevcon DC-DC converter and one DeltaQ with DC-DC converter..

    Sent from my SM-T310 using Tapatalk

  10. #9
    Empulse R #24 frodus's Avatar
    Join Date
    Aug 2010
    Location
    Portland, OR
    Posts
    2,416
    Post Thanks / Like

    My Social Networking

    Follow frodus On Twitter
    Where is everyone located, for my info

  11. #10
    Senior Member Stevo's Avatar
    Join Date
    Nov 2014
    Location
    Behind the Redwood Curtain- REDWOOD ORIGINAL!!
    Posts
    349
    Post Thanks / Like
    I'm in NorCal Humboldt county. I wont have the funds to upgrade my bike until next year's tax return, so no rush on my end.
    Original build: http://vorworxemc.wix.com/vorworx
    Current rides: '96 Honda Ohlins VFR, '03 Cannondale C440R, '03 Cannondale Cannibal, '06 Yamaha 450 Wolverine 4x4

Page 1 of 4 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •