Originally Posted by Ken Will
Thinking of either keeping it bare metal finish it a bit and just clear coat it or go with matte black and bronze. But there is a long time to for that...
Originally Posted by Stevo
You'll probably need to ventilate your motor very well. I'm running 7.04:1 and I had to do the following:
Originally Posted by milton
- add 12v radial blower to force air into the openings on the shaft side to ventilate rotor
- add 12v fan underneath the motor to ventilate stator
- remove the bell shape cover to help the mechanical fan to suck air out of rotor
The controller also sits on heatsink which are ventilated by two 12v blowers which exhaust is blowing on top of motor.
Which belt have you used ? The Gates Carbon GT ? It has blue teeth, that's the only one which can handle this power in that width and pitch 8 (I presume).