Power in Flux
Likes Likes:  0
Results 1 to 7 of 7

Thread: 520 Chain and Sprockets for sale

              
   
   
  1. #1
    Junior Member
    Join Date
    Oct 2016
    Location
    Salt Lake
    Posts
    24
    Post Thanks / Like

    520 Chain and Sprockets for sale

    I downsized from a 520 chain to a 420 chain.
    For Sale $125: plus Shipping.($20 in US not sure elsewhere)
    70T rear sprocket, Fits Ninja 250
    16T and 14T front sprocket, fits Motenergy Motors
    126 Link 520 O Ring Motorcycle Chain.

    All Have about 400 miles on them.
    Gear.jpg

  2. #2
    Senior Member DRZ400's Avatar
    Join Date
    Aug 2010
    Location
    New Jersey, USA
    Posts
    673
    Post Thanks / Like
    Next you need to upgrade to Altrax SMP72400.... the pull is MUCH stronger than the sluggish Kelly! MUCH!!
    2003 Ninja 250EX, Agni #95R, 6:1 Gearing, 11 Leaf Modules.
    Alltrax SPM72400, 400 amp Controller, all LED lighting
    2014 CRF450X Supermoto
    http://www.evalbum.com/1955
    http://www.evalbum.com/3337

  3. #3
    Senior Member
    Join Date
    Aug 2013
    Location
    Ephraim, UT
    Posts
    210
    Post Thanks / Like
    Quote Originally Posted by cmcnall View Post
    I downsized from a 520 chain to a 420 chain.
    For Sale $125: plus Shipping.($20 in US not sure elsewhere)
    70T rear sprocket, Fits Ninja 250
    16T and 14T front sprocket, fits Motenergy Motors
    126 Link 520 O Ring Motorcycle Chain.

    All Have about 400 miles on them.
    Gear.jpg
    I am interested, but I need to check if the rear sprocket will fit my GPR-S. Can you share the bolt circle diameter, hole diameter, etc? Also, would you be open to an offer?

    Edit: I am in Utah, and travel to Salt Lake often enough- I could pick it up, and check out your build, if you were open to it!
    Last edited by nedfunnell; 2 Weeks Ago at 1209.

  4. #4
    Junior Member
    Join Date
    Oct 2016
    Location
    Salt Lake
    Posts
    24
    Post Thanks / Like
    6x 10.5mm bolt holes 130mm on center diameter.
    Center hole is 110mm
    I'm open to an offer especially if you pick it up.
    hope it fits.

  5. #5
    Senior Member
    Join Date
    Aug 2013
    Location
    Ephraim, UT
    Posts
    210
    Post Thanks / Like
    Quote Originally Posted by cmcnall View Post
    6x 10.5mm bolt holes 130mm on center diameter.
    Center hole is 110mm
    I'm open to an offer especially if you pick it up.
    hope it fits.
    Cool, I will hop outside and take some measurements. I may be able to make it work by drilling for my 4-bolt pattern. Where in SLC are you?

  6. #6
    Senior Member
    Join Date
    Aug 2013
    Location
    Ephraim, UT
    Posts
    210
    Post Thanks / Like
    Bummer- no such luck, my bolt pattern is a measly 75mm diameter. If I had this sprocket in the shop, I might make an adapter, but as long as I'm having something machined, it's probably cheaper altogether just to make a new sprocket. It'd be neat to meet up with you sometime anyway, though!

  7. #7
    Junior Member
    Join Date
    Oct 2016
    Location
    Salt Lake
    Posts
    24
    Post Thanks / Like
    too bad, let me get my bike put back together then i'll have you over. I'm at the bottom of big cottonwood canyon.
    Also if you want the chain and front sprockets I can part with them cheap.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •