Search:

Today i charged it partly using my sachs charger and me and my buddy Stefan had a few runs with it,
man it really pulls so much nicer than the sachs:D
really looking forward getting it registered...

Hi
as promised following up with pics:

Simple solution for a guard plate and its attachment
8654
8655

on the bike
8656

Well, not literally

Due to corona there is nothing you can do without appointment here atm.
Been trying to get a call back from my MOT engineer whole of last week without success. Until suddenly...

HI and welcome to elmoto.

just a thought from my own experience:
Try as hard as you can to source some Nissan, BMW, VW golf, chevy volt, Kokam brand, A123 cell.... packs. In other words grade A...

HI all,
sorry no pics today - will follow up. Just been to buisy working on the bike ..

So after finally finishing the lower protective cover for the Kelly (still needs painting), i took it for...

Hello & welcome to elmoto

Greets from Munich, Bavaria

Flo

Hi
reprogrammed the Kelly Controller today and had the motor turning first try ;)

primary drive connected, thankfully cad files were spot on, chain thight but not too much.
8646


Vid shows...

Hi
been a while.
have the bikes cables done, got it inspected by my buddy robert, who promptly found a mistake in my diagram, solving the the dc show "on" but not charging.
detail:the switched...

Hi
days getting longer means i can put in 1 or 2 hrs after work.
So just before it was getting to dark to take pics, the re-routed cables and some more notching ensured the fairings close...

Hi
got all lights, horn cabled.
Works perfectly so it seems my wiring diagram being free of faults
8633

wrapped the loom and cleaned up the cockpit
8634

Once more time for some finishing...

HI
thx spoonman

progress gets less visible, but there is some
charger holders gone from 180 gr. to 118 gr. - when i mentioned a diet i meant it :p
8631

also updated the wiring circuit,...

Hi,

Got the braces done

8624

another cutout was needed in the tank in order to make room for the chargers plugs
8625

Then it was time to do some finishing touches for a change

Hi,
yes thats all planned, want to sleeve it with some tube but i am still missing the right sized washers. Thanks for your concerns and kind words :)

flo

Hi
@Spoonman
Thanks, will do as soon as there is good weather again.

Got the tank cleaned yesturday

8616

And during fine sunday noon got it filled and painted to stop it from rusting...

HI
Most dreaded step done. :)

After only a slight notching (which had been anticipated)

8611


Tank fits perfect ;):cool:

Hi
been a bit longer than 48 hrs but i got the braces done.
just enough material left
8608

perfect fit

8609

also milled up some holders for the GigaVac and fuse from leftover FG

Hi
thanks for your concerns.
There will be a diagonal brace tie-ing the motormount onto the front holder of the battery, as well as two braces tying the motor mount to the battery. All designed in...

Well, if it carries on like this it will weight a ton by the end of the week:p
Guess i need to put it on a strict diet from now on.

After getting in the axle into the bike and securing it by two...

Hi,
i did get that message too, but never cared.
Now i get "invalid redirect" and have to go to forums main page manually-
something still weard in my eyes. ( not that i know anything about...

Hi all,
found some time to assemble the first parts.
Got the mounting plates in, as well as the Me1115 and mounted the Kelly.
Found a new place for the latter, which not only stiffens up the setup...

Hi
well i haven`t gone through the calculations myself. But what i did is to run umpteen scenarios through the Beltcalculator on the mfg`s site. www.mädler.de for those interested. This of course...

Hi,
yes that is all good and valid for your normal drive set up.
Using the belt calculator of Mädler.de i found that once you are using smaller sprockets overall and having higher revs on the belt...

Hi
a Quick search found me the winstons for 60 pp (litrade.de) to 75 pp (ebay) so 1200 to 1500 for 20 of those.
On aliexpress i found lipos 40 to 60Ah ranging from 25 to 40 pp so (as you will only...

Doesn`t the mfg offer replacement packs?
Otherwise: where do you look for them?
On Alibaba most ads would give a c rating eventhough as mentioned these are overrated most of the time .. see my last...

HI,
well the instructions say 70 amps (times 60v is about 3500 watts).
So you should be looking for a 60Volts pack, c rating depending on capacity you choose.
Example 40 Ah pack should deliver at...