Search:

Why do you use 520 chain? It must be much easier use 530 chain and use ANSI #50 7/8 regular chain sprockets? There are a lots of them on ebay.

According to this wiring diagram ABS is a separate unit 49. http://www.deltasign.de/moto/gts/GTS1000_SHALTPLAN.jpg

Maybe you can reuse old wiring, but i think since ABS unig take kn signals from...

gwl.eu sells Winston cells and ships in europe. Check with them

https://shop.gwl.eu/Winston-40Ah-200Ah/WB-LYP40AHA-LiFeYPO4-3-2V-40Ah.html

Small update. Found a manual for Curtis OS31 which describes auto-characterization controller run it self.

It took 60 seconds. I dont know if is enough or if I need to adjust more things later,...

Thank you Travis.

So you saying it is difficult to program it correct right at home?

I think I got a programmer with controller and controller is programmed for ME1616.

Hi,

I am planning to convert from DC (Alltrax AXE7245 & ME1003) to AC (Curtis 1236SE and
ME1115) on my motorcycle.

Is it good match?

It is not much space in my frame and since ME1115 have...

Hi Frodus, thank you for your answer.

I start to think there is something wrong with my charger.

Last time when it jumped the way i described as soon i tapped lightly on charger housing with a...

Hi

I have a Quiq HF/PFC 72V charger 912-7200 and it been behaving strange for a while.

I bought it used from a member on ES and I think it was reprogrammed by Frodus some years ago.

I use...

Your pictures are not shown for me, but i thinking about same thing.

But Android tablet for 399$ is a lot to pay. Sony Tablet Z IP55 should work for you, but it is quite large.

There is two...

Sold

I charge one of my motorcycles to 90.3V ( 11 leaf modules) - level charger stops. It works well. Can it be any problem?

I measure 90.3 on pack, but Alltrax software says it 89.9V.

I have a Alltrax AXE4844 for sale together with matching contactor and small Dc/Dc converter. It can handle 400A and is smaller than 72 volts controller. Will you use lithium or lead batteries?

Is it possible you can upload manual for this unit?

For me it sounds like a problem with throttle signal. In Alltrax Controller Pro software Monitor tab you can see how much throttle controller get. So buy a serial cable and check it next when you...

Anyone know if there any problem if I mount cells with poles up? Will it cause any problem?

In Leaf batterybox cells are placed on cells sides ( ‖ ‖ ‖ ‖ and ═ ═)

I am building a bike with leaf cells and I want voltage to be as high as possible max 90 V.

Maximum voltage for Agni 95R is 84 V according to service manual. If higher voltage used - motor...

here is my code
http://elmoto.net/showthread.php?t=4209

Original from this thread

In 2013, before I discovered there is something called HC Cycle Analyst :), for 3 month I used Arduino Mega to read out values from Alltrax Axe 7245 to show values on a...

I see what i can find, no secrets ...

It can be many reasons... In my build i used arduino to talk with axe7245 and view voltage and current. If you read often enough you can calculate Ah value too. Not as good as Cycle analyst but...

Can you use 530 chain instead, it will be much easier to find sprockets on Ebay.

Missed that Lunchbag already answered

Why bother with drilling and so? Search on Ebay for sprocker 7/8 bore and you will find a lot of different sprocket you can use.

...

Have someone converted BMW K1200? Would be interesting to see how shaft drive is working with electric motor.

Have you considered to install motor on swing like el ninja did so you can use more space for batteries?

6642
Your swing seems to be rectangular.
...